Cart 0

motogadget m-unit basic


Product ID: 2406 Category: . Tag: .

The new m.unit basic has moved on from the established previous version by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs and replaceable high-quality cable clamps.

The m.unit basic is the digital control unit for your motorbike – the heart of the entire on-board electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also performing fuse functions.

There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time.

When used in combination with the Motogadget m.button, all switch connections are reduced to one single cable.

Specifications and features
L/W/H: 101 x 61 x 28 mm
Weight: Approx. 180 g
Fastener: 2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus
Operating voltage: 6 V – 20 V DC
Operating temperature: -20°… +80°C

1 x input (+12 V switched) for ignition lock or m.lock
11 x control input (minus/switched to ground) for:
– Left turn signal
– Right turn signal
– Lo/Hi-beam
– Starter
– Horn
– Brakelight
– Kill switch
– Stand switch
– LIN bus
– AUX1
– AUX2

10 x Outputs (+12V) for:
– Left turn signal
– Right turn signal
– Lo-beam
– Hi-beam
– Starter
– Horn
– Brakelight
– Ignition
– AUX1
– AUX2

Scope of delivery:
– m.unit basic
– Approx. 50 cm connecting cable for battery positive terminal with 10 mm² cross section
– 2 cable eyes
– 1 x M5 stainless steel bolt
– 2 x M5 stainless steel bolts with nut
– 1 x speed sensor with 2 magnets
– Detailed installation and operating instructions